Noise and Wobble
MECHANICAL
Noise and wobble
Stop the fan if movement is severe, the ceiling mount shifts, a blade is damaged, or any part contacts the guard or ceiling.
QUICK CHECK
Follow these steps in order
01
Turn power off and wait for a full stop.
Do not touch moving blades or guards.
Do not touch moving blades or guards.
02
Check the ceiling mount and canopy.
The mounting bracket and electrical box must be secure and rated for a ceiling fan.
The mounting bracket and electrical box must be secure and rated for a ceiling fan.
03
Tighten accessible hardware.
With power off, check blade screws, blade arms, guard fasteners, light-kit screws and decorative covers.
With power off, check blade screws, blade arms, guard fasteners, light-kit screws and decorative covers.
04
Inspect every blade.
Look for damage, warping, missing weights, reversed installation, or unequal blade-to-ceiling distance.
Look for damage, warping, missing weights, reversed installation, or unequal blade-to-ceiling distance.
05
Check clearances.
Make sure wires, cables, pull chains, decorative parts and guards do not touch rotating components.
Make sure wires, cables, pull chains, decorative parts and guards do not touch rotating components.
06
Test one speed at a time.
After safe reassembly, observe from low to high speed and record when the noise or wobble begins.
After safe reassembly, observe from low to high speed and record when the noise or wobble begins.
WHAT THE RESULT MEANS
Next step
A rhythmic click usually points to a rotating part or repeated contact. A hum without rotation may be electrical or motor-related. Balancing should be attempted only after the mount and all fasteners are confirmed secure.
STILL NOT SOLVED?
Send diagnostic details
Email ohniyou@ledphy.com with the order number, model/SKU, product-label photo, remote front and back, receiver label, and a short video of the issue.